• slidebg1

    Welcome to AMPS

    Manufacturing Company Jamshedpur

  • slidebg1

    Quality Products

    Idlers, Pulleys & Volumetric Feeders etc.

  • slidebg1

    Zero Defect Production

    with quality raw materials

  • slidebg1

    We are own Brand

    AMPS Engineering & Equipments Pvt. Ltd.


What We Are

amps engineering & equipments pvt. ltd. was incorporated in the year 2004 in order to meet the customers demand for the quality products in conveyor equipments like IDLERS, PULLEYS & VOLUMETRIC FEEDERS etc. Under the brand name " amps ".

amps engineering & equipments pvt. ltd. is specialized in manufacturing these products in its Own Manufacturing Unit (OMU) located at Industrial Area, Jamshedpur, India.

It is equipped with all kind of machines and tools supported by adequate inspection equipments with skilled workforce.

Our aim is to manufacture more accurate and zero defect production with quality raw materials.

amps engineering & equipments pvt. ltd

Our Products

What we engineer


What our clients say


Equipped with deep groove ball bearing covering 20mm to 45mm diameter. The Idler are life lubricated.
The Idlers are designed as per IS-8598/ISO-1537/IPSS-2-03-004-85
Special ERW tube as per IS-9295 with close tolerances are used. Idlers with seamless steel tubes can also be supplied if required. Tubes are recessed at both ends simultaneously by special purpose machine to guarantee concentricity.
These are made from deep drawing quality steel. Housing are welded to both ends of tube simultaneously by an automatic welding machine forming a mono-back design to ensure rigidity, lower rotating and minimum out-of-roundness.
Idlers are provided with specially designed, laboratory-tested , multi-labyrinth, non-contatcing type. Seal which keep dust , moisture and dirt away from the bearing. A waterproof weather cap at the rooler end prevent water entering alongside the shaft. A specially designed bloc-seal prevent grease from entering the roller.
Shafts are made of bright bar of composition EN-8 C-40/C-45.
The frames used are of Jindal/Sail material or any other equivalent of Grade A following I52062.
The rollers are lubricated with high quality lithium based grease to give it long service life.

We at Amps Engineering are working towards the best quality and have in house facility for the testing of the rollers. The rollers are subjected to the following testing procedures as per the norms of the customers.

  • Total Indicating Reading (T.I.R.)
  • Friction Factor Test
  • Duet Ingress Test
  • Watch Test

We also take into consideration a sincere look towards the quality of our raw materials and subject them to our in house inspection by our quality team.